Lasko 100 Series Personal Ceramic Heater
Safety Instructions
- To disconnect the Heater, turn the Heater OFF, then remove the plug from the outlet.
- Always unplug the Heater when not in use.
- Unplug the power cord before servicing or moving the Heater.
- Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening, as it may cause an electric shock, fire, or damage the Heater.
- Do not block or tamper with the Heater in any manner while it is in operation.
- Do not block air intakes or exhaust in any manner.
- Do not place on soft surfaces, like a bed, where openings may become blocked.
- Do not depend on the on/off switch as the sole means of disconnecting power when servicing or moving the Heater.
- Always unplug the power cord.
Parts Included
Controls
- A thermal overload protector is built in to prevent overheating.
- If an overheated temperature is reached, the Heater will automatically shut off. It can only resume operation when the user resets the unit.
To Reset Heater
- Unplug the heater and wait 10 minutes for the heater to cool down.
- After the heater has cooled down, plug the unit into a 120V ~ electrical outlet and follow the operation instructions described in this manual.
Maintainance
To reduce the risk of electrical shock and fire, please observe the following instructions.
- Cleaning the Heater regularly will help to maintain its efficiency.
- Always unplug the cord before moving, servicing, or cleaning.
- NEVER place the Heater in or near water. DO NOT IMMERS THE HEATER IN WATER.
- Clean the Heater only with a vacuum equipped with a brush attachment; the vacuum will remove the lint and dirt from the surface of the Heater.
- Vacuum intake grills every two weeks; this will help to maintain the optimum Heater performance.
- Use a toothbrush or other soft-bristle brush to gently loosen any dirt not removed by the vacuum.
- NEVER attempt to take apart the Heater.
- Clean the body of the Heater with a soft cloth only.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
Troubleshooting
If your Fan fails to operate, see below for a list of probable causes and solutions.
- Be sure the power cord is plugged into a working electrical outlet.
- Make certain the batteries in the remote control are new and properly installed.
Servicing
- Â For servicing, other than general user maintenance, please contact Customer Service at (800) 233-0268, Monday through Friday, from 8 am-5 pm Eastern.
Storage
- Â Store the Fan with these instructions, in the original carton, in a cool, dry place.
Disposition
- Â Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local Lasko 100 Series Personal Ceramic Heater waste service provider.
Warranty
What does this warranty cover
- This product is warranted against defects in workmanship and/or materials.
How long does it last
- This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
What Lasko will do
- During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that proves to be defective or replace the whole product with the same or a comparable model.
What does this warranty not cover
- This warranty does not cover shipping costs for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
- Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights.
Customer Service
- Email: producthelp@lasko.com
- website: www.lasko.com
- visit www.1800recycling.com
- Toll-Free: (800) 233-0268.