Lasko T42951 Remote Control Saver Fan
Safety Instructions
ALWAYS be sure the plug fits tightly into the outlet when using your Lasko T12110 Twist Top Tower Fan. When plugs fit loosely into outlets, they may slip partially out of the outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard.
ALWAYS unplug the power cord of your Lasko T12110 Twist Top Tower Fan when servicing, cleaning, or moving the Fan. DO NOT use the ON/OFF switch as the sole means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the Fan when not in use.
THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). Match the wide blade to the wide slot in the outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician.
- AVOID the use of extension cords, power strips, power taps, outlet-style air fresheners, or other cord-connected devices, as these devices may overheat and cause a fire hazard.
- DO NOT route the power cord under rugs, carpets, runners, or furniture.
- This may damage the cord or cause it to overheat, creating a fire hazard.
- DO NOT block, cover, or obstruct air flow to or from the Fan while in operation.
- This Fan is not suitable for use in hazardous locations.
Assembly
- For ease of assembly, lay the Fan down so that the front grill and control panel are facing up.
- Assemble the Support Base Halves by interlocking the bosses on Support Base B into the Boss Slots on Support Base A. (Figure 1)
- Align the Support Base Assembly with the Motor Base.
- Thread the Power Supply Cord through the large hole in the center of the Support Base Assembly.
- Make certain to align the Hook Slots (Figure 1) on the Support Base Assembly with the Hooks on the Motor Base.
- To secure the Support Base Assembly to the Motor Base, hold the Motor Base in place while turning the Support Base Assembly clockwise (towards the locked symbol) until it no longer turns and locks in place.
- Gently pull any excess slack from the Power Supply Cord and place it in the Wire Locating Trough.
Operation
This Fan may be operated by the Manual Controls located on the front of the unit or by the Remote Control.
- Place the Fan on a firm and level surface. Furniture surfaces and/or hardwood floors.
- Plug the cord set into a 120-volt outlet.
- Apply power to the Fan by pushing the Power Button ( ).
- The Fan will initially operate in High Speed, speed 3.
- FAN SPEED: You may now adjust the Fan speed to the desired level, 1 (Low), 2 (Medium), or 3 (High) by pressing the Fan Speed Button ( ).
- OSCILLATION: Press the Oscillation Button ( ) to start and stop the oscillation function.
- NIGHTTIME FEATURE: Press the Nighttime Button once to turn on.
Remote Control
- Install two “AAA” batteries (not included) as shown in Figure 6.
- All the functions performed with the Remote Control work identically to the Manual Controls.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Maintainance
- Always unplug the cord before moving, servicing, or cleaning.
- NEVER place the Fan in or near water.
- Clean the Fan only with a vacuum equipped with a brush attachment; the vacuum will remove the lint
and dirt from inside the Fan. - NEVER attempt to take apart the Fan.
- Clean the body of the Fan with a soft cloth only.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
Troubleshooting
If your Fan fails to operate, see below for a probable cause and solution: All other servicing, except general user-maintenance, should be performed by an authorized service representative. Store the Fan with these instructions, in the original carton, in a cool, dry place.
Warranty
WHAT THIS WARRANTY COVERS
This product is warranted against defects in workmanship and/or materials.
HOW LONG DOES HIS WARRANTY LAST
This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
WHAT LASKO WILL DO
During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective on your Lasko T12110 Twist Top Tower Fan, or replace the whole product with the same or a comparable model. Contact the Lasko customer service department to obtain a Return Authorization (“RA”).
WHAT THIS WARRANTY DOES NOT COVER
This warranty does not cover shipping costs for the return of the Lasko T12110 Twist Top Tower Fan to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or replacement.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights.
You may also have other rights which vary from state to state and province to province. Proof of purchase of the Lasko T12110 Twist Top Tower Fan is required before a warranty claim will be accepted.
Customer Service
- Toll-Free: (800) 233-0268.
- Visit: www.1800recycling.com
- Email: producthelp@lasko.com
- Website: www.lasko.com