Anko MiMo-23 Bottle Brush Cleaner Instruction Manual

Anko MiMo-23 Bottle Brush Cleaner

Safety Instructions

When using any electrical product, always follow these basic safety precautions:

1. Please read all instructions carefully before using this product.
2. Do not immerse the main unit in water or other liquids to avoid damage to the motor.
3. Children should be supervised to ensure that they do not play with the appliance.
4. In the absence of supervision, the cleaning and maintenance work should not be done by a child.
5. Keep the appliance away from flammable and explosive substances.
6. Switch OFF the appliance before changing accessories.
7. Do not operate the product near any explosive, flammable object or liquid.
8. Keep hair, loose clothing, and all parts of the body away from moving parts.
9. Do not make the product wet except for the brushes.
10. This appliance contains batteries that are non-replaceable.
11. Fix the brushes firmly before operation.
12. Always wear eye protection when using the scrubber with irritating substances.
13. Rubber gloves are also recommended.
14. Do not insert attachments/accessories when the unit is running.
15. Do not operate without the charging port cover in place.
16. For cleaning, please refer to the CLEANING AND STORAGE section.

Parts

1. Driving shaft
2. Main unit
3. Handle the bending joint
4. Indicator light
5. On/Off button
6. Low speed button
7. High-speed button
8. Charging port with cover
9. Bottle brush
10. Straw brush
11. Nipple brush
12. USB cable

Before First Use

• Fully charge the appliance before first use.
• Always power off the appliance before charging.
• The supplied USB charging cable should be inserted into the standard USB power source rated at 5Vdc. 1A specification.
• The red indicator lights up when charging, and the light becomes green when fully charged.
• The charging time is around 2 hours.

Using the Device

1. Select the appropriate brush according to your cleaning requirements, align with the driving shaft and push on until you hear a click. To take off the brush, just pull it off. Make sure the charging port is properly sealed by the cover. Now the appliance is ready for use.
2. To choose a comfortable position to use the brush, rotate 180°until you hear a click sound.
3. Press the On/Off button, the blue indicator flashes, and the appliance is now in standby.
4. The appliance will automatically shut off if no further operation.
5. Press button 1 or 2 to choose the speed, the blue indicator lights up, and the appliance starts running.
6. Press the On/Off button again to turn off the appliance, and the indicator light goes off.f

Cleaning & Maintainance

• Clean the appliance and its accessories after each use.
• Do not use a steel ball, abrasive cleaner or corrosive liquid to clean the product.
• The main unit can be wiped with a slightly damp cloth.
• Do not rinse with soap or spray water or other liquids to avoid damage to the appliance.
• Soak the brushes in soapy water before rinsing.
• Ensure the product is clean and dry before storage. Store the product indoors.
• This product contains a Li-ion battery. It should be stored in a clean, dry, ventilated room with an ambient temperature range of -5℃ to + 35℃ and a relative humidity of 25% to 75%.

Technical Specifications

• Input: 5Vd.c. 1A
• Battery: Li-ion 3.7V 1200mAh

Disposal

Do not dispose of this product with normal household waste collection. If unsure, contact the local council waste management service for proper disposal facilities available for your area. a

Warranty

This warranty is in addition to your rights under the Australian Consumer Law. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product.

Customer Service

• Website: https://ankoglobal.com/
• Ph: +1 800-446-2656

FAQs

Q: What types of bottles can the MiMo-23 Bottle Brush Cleaner handle?

Baby bottles, reusable drink bottles, glass jars, thermoses, and narrow-neck containers can all be used with the MiMo-23. It functions best on bottles with apertures big enough to allow the brush head to pass through.

Q: Can I use the brush on delicate materials like glass?

Indeed. The bristles are safe for glass, stainless steel, and the majority of plastics because of their delicate yet effective design.

Q: Is the MiMo-23 safe to use on bottles with coatings or printed designs?

Indeed, the soft bristles are generally safe for printed designs and do not cause abrasion. But don’t put too much pressure on prints that are fragile or of poor quality.

Q: Can I use hot water with the brush cleaner?

Indeed. Warm or hot water can be used with the MiMo-23, but steer clear of boiling water to avoid premature bristle or handle wear.

Q: Can I use dish soap or cleaning tablets with the brush?

Of course. Liquid dish soap is a good fit for the brush. For optimal results, clean the bottle before scrubbing with the brush if you’re using cleaning tablets.

Q: How do I clean the brush itself?

After every usage, thoroughly rinse the bristles and let the brush air dry upright. For a thorough cleaning, occasionally soak it in warm, soapy water or a vinegar solution.

Q: Can I put the MiMo-23 in the dishwasher?

The majority of machines can handle a dishwasher’s top rack, but always read the product label.

Q: How often should I replace the brush head?

Every two to three months, or sooner if you observe fraying, discolouration, or decreased cleaning effectiveness, replace the brush head.