Milwaukee M12 BI Compact Inflater
Safety Instructions
Always wear goggles and ear protection when using the machine. Do not leave the appliance unsupervised when it is switched on. Never direct any compressed air or blow any dust toward people or animals. Do not use the device in rooms with a potentially explosive atmosphere. Risk of Bursting. Do not overeat. Follow all manufacturer‘s instructions for the item. Do not set the tool to an output pressure greater than the marked maximum pressure of the item to be inflated.
Never block or plug the air outlet during operation. Check the air hose for wear or damage before each use. Check all accessory connections are secure. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision. Have the damage repaired immediately by an authorised workshop. Following 10 minutes of continuous operation, a short break of at least 10 minutes must be taken to allow the device to cool down. Remove the battery pack before starting any work on the appliance. To avoid injury and damage, never immerse the tool, removable battery, or charger in liquid or allow liquid to penetrate them. Use only System M12 chargers for charging System M12 battery packs. Do not use battery packs from other systems. Never break open battery packs and chargers, and store them only in dry rooms. Keep dry at all times.
Condition for Use
The inator is intended to eat items such as car tyres, bike tyres, lawn equipment tyres, sports equipment, air mattresses, beach toys, and other inanimate objects.
Maintainance
Remove the battery pack before starting any work on the appliance. The ventilation slots of the machine must be kept clear at all times. Service and repair work may only be carried out by authorised specialist workshops. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger, and battery pack to a MILWAUKEE service facility for repairs.
Use only Milwaukee accessories and Milwaukee spare parts. Should components need to be replaced that have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the Article No. as well as the machine type printed on the label, and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
Batteries
Temperatures inover0°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
For battery pack storage longer than 30 days, store the battery pack where the temperature is below 27°C and away from moisture. Store the battery packs in a 30% – 50% charged condition. Every six months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors offers to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk).
Transporting Batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The user can transport the batteries by road without further requirements. Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations.
Specifications
Federal Communications Commission
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference Milwaukee 3154-20 M12 75 Drain Camera to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV Milwaukee 3154-20 M12 75 Drain Camera technician for help. This device complies with part 15 of the FCC Rules and ISED-Canada’s license-exempt RSS standards.
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Limited Warranty
USA & CANADA
This MILWAUKEE power tool* is warranted to the original purchaser from an authorised MILWAUKEE distributor only to be free from defects in material and workmanship.
Normal Wear
This warranty applies to products sold in the U.S.A. and Canada only. Please consult the ‘Service Centre Search’ in the Parts & Service section of MILWAUKEE’s
Customer Support
- Website: http://www.milwaukeetool.com
- Ph: 1.800.729.3878
- Monday-Friday: 7:00 AM – 6:30 PM CST
FAQs
Q: What is the Milwaukee M12™ BI Compact Inflator used for?
Sports balls, car tyres, bike tyres, and small inflatables can all be rapidly and precisely inflated with the M12TM BI Compact Inflator, a portable, cordless air inflator. Milwaukee’s M12TM REDLITHIUMTM battery technology powers it, providing ease without the need for cords or compressors.
Q: What type of battery does it use?
Any Milwaukee M12TM REDLITHIUMTM battery, including CP, XC, and HIGH OUTPUTTM packs, can power this inflator. Milwaukee suggests using M12TM XC 4.0Ah or higher-capacity batteries for optimal performance and extended runtime.
Q: What is the maximum pressure the inflator can produce?
With a maximum pressure of 120 PSI (8.27 bar), the M12TM Compact Inflator is strong enough to inflate most leisure tyres as well as normal car, light truck and bicycle tyres.
Q: How long does it take to inflate a car tyre?
Starting pressure and tyre size affect inflation time. Based on a 195/65R15 tyre, the M12 Inflator can typically fill a car tyre from 0 to 35 PSI in less than a minute.
Q: Can I use the inflator for truck or heavy equipment tyres?
Light to medium-duty applications are the target market for the M12TM Compact Inflator.
Q: Can I use it continuously for long periods?
To avoid overheating, don’t operate the inflator nonstop for longer than ten minutes. Before starting up again, let the device cool for at least ten minutes if it gets hot.