Milwaukee M18 ALIS Servis Area Light
Safety Instructions
- Remove the battery pack before starting any work on the appliance.
- Do not dispose of used battery packs in the household refuse or by burning them.
- Milwaukee Distributors offers to retrieve old batteries to protect our environment.
- Do not store the battery pack together with metal objects (short circuit risk).
- Use only compatible Milwaukee chargers from the same battery platform for charging battery packs.
- Do not use battery packs from other systems.
- Battery acid may leak from damaged batteries under extreme load or extreme temperatures.
- In case of contact with battery a, wash it off immediately with soap and water.
- In case of eye contact, rinse thoroughly for at least 10 minutes and immediately seek medical attention.
- Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleaching-containing ducts, etc., can cause a short circuit.
Assembly
- Remove the battery pack before starting any work on the machine.
- Devices connected to the USB port are supplied with power. Any device that uses more than 3 A of DC electrical current will trip a self-resetting function and disable the output.
- Devices connected to the USB port are supplied with power. Any device that uses more than 2.4 A of DC electrical current will trip a self-resetting function and disable the output.
Use
Conditions For Use
- The battery lamp can be used as lighting independently of a mains power supply.
- Do not use this product in any other way than as stated for normal use.
USB Power Outlet
- This outlet can be used to charge a cell phone, power an MP3 player, or any other devices that use less than 2,4 A of DC electrical current (USB-A) and less than 3A of DC electrical current (USB-C).
- The USB power button will remain illuminated when devices are charging.
Use of Li-Ion batteries
- Batteries that have not been used for some time should be recharged before use.
- Temperatures in excess of 50°C reduce the performance of the battery.
- Avoid extended exposure to heat or sunshine (risk of overheating).
- The contacts of chargers and batteries must be kept clean.
- For an optimum lifetime, the batteries have to be fully charged after use.
- To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.
- For battery storage longer than 30 days: Store the battery where the temperature is below 27°C and away from moisture.
- Store the battery in a 30% – 50% charged condition. Every six months of storage, charge the battery as normal.
Transport of Li-Ion batteries
- The user can transport the batteries by road without further requirements.
- Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons, and the process has to be accompanied by corresponding experts. When transporting batteries:
- Ensure that battery contact terminals are protected and insulated to prevent a short circuit.
- Ensure that the battery pack is secured against movement within the packaging.
- Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.
Customer Support
- Website: https://www.milwaukeetool.com
FAQs
Q: What power source does the ALIS light use?
Ans: All other M18 tools and equipment are compatible with Milwaukee’s M18TM REDLITHIUMTM battery system, which powers them.
Q: How many lumens does it produce?
Ans: In low-light conditions, the ALIS area light provides up to 4,000 lumens of TRUEVIEWTM high-definition lighting for optimal visibility and colour accuracy.
Q: Is the brightness adjustable?
Ans: Indeed. In order to match the required lighting intensity while maintaining battery life, the device has numerous brightness modes, usually Low, Medium, and High.
Q: Does the light remember my last brightness setting?
Ans: Indeed. The memory recall feature of the ALIS lamp adds ease when using it repeatedly by turning it back on at the brightness level that was last used.
Q: Can I use the ALIS light while charging a battery?
Ans: No. Neither pass-through charging nor an AC converter is included with this model. It is solely intended to run cordlessly on Milwaukee M18 batteries.
Q: Is the LED replaceable?
Ans: No. The LED requires no maintenance and is integrated. Under typical circumstances, it should last the tool’s lifespan and is rated for thousands of hours of operation.