Nutribullet NBF50500 Combo Blender Instruction Manual

Nutribullet NBF50500 Combo Blender

Safety Instructions

2. This appliance is for household use only.
3. Do not use this appliance for anything other than its intended use.
4. Do not use in moving vehicles or boats.
5. Do not let the power cord hang over the edge of a table or countertop.
6. Do not let the power cord touch hot surfaces, or become knotted or tangled.
7. Do not touch hot surfaces.
8. Do not place the cooker on or near a hot gas or electric burner, or in a heated oven.
9. Extreme caution must be used when moving an appliance containing hot food or hot liquids.
10. Always attach the plug to the appliance first, and then plug the cord into the wall outlet.
11. To disconnect, press the power button to power “OFF”, then remove the plug from the wall outlet.
12. Ensure that the surface where the appliance operates is stable, level, clean, and dry.
13. Remove and safely discard any packaging material or promotional labels before using this appliance for the first time.
14. To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
15. Always make sure the unit is properly and completely assembled before connecting to a power outlet and operating.

What’s Included

Description

Getting Started

• Make sure the Motor Base is plugged in for use. DO NOT attempt to operate the Pitcher on the appliance without attaching the Pitcher Lid and Vented Lid Cap.
• Never run the appliance while empty. Appliance accessories are not intended to be used in the microwave, as they may damage the microwave.
• Never leave the appliance unattended while in use.

Never blend hot liquids when using any sealed nutribullet® Cups

Heated ingredients can pressurise sealed containers when agitated and violently expel hot contents upon opening. Always start the blending process with room temperature or refrigerated ingredients and liquids (21°C/70°F or cooler).

Use extra caution when blending hot liquids in the Pitcher.

Steam and splatters can escape through the vented lid, potentially causing scalding and/or burns. NEVER blend hot liquids in your pitcher without the Pitcher Lid and Vented Lid Cap attached. The Vented Lid Cap is ventilated to allow steam and pressure to release, while guarding against excess splashing. NEVER blend hot liquids in your nutribullet® Cups or any other sealed vessel.

When blending hot liquids, add liquid and solid ingredients to your Pitcher below their respective MAX lines. Attach the Pitcher Lid with the Vented Lid Cap inserted. Press the POWER icon, then begin blending on the LOW setting. Once ingredients are integrated and the mixture is level (no splashing), increase speed as needed.

Assembly & Use

1. Review all warning and caution statements in the Important Safeguards section (pg 2-9) and on the previous page before proceeding to Step 2.
2. Place the Motor Base on a clean, dry, level surface such as a counter or table.
3. Place the Pitcher on a clean, dry, level surface. Add the ingredients to the Pitcher, making sure they do not exceed the MAX line.
   
4. Place the Pitcher Lid with Vented Lid Cap attached on the Pitcher, making sure it’s aligned with the handle.
5. Place the Pitcher onto the Motor Base — handle facing to the right of the Blending Control Panel, never towards the back, and gently twist clockwise so it locks in place.
6. Plug the power cord into an electrical outlet and press POWER to turn on the blender.
7. To start blending, select a speed or the EXTRACT program on the Blending Control Panel. This program will turn off automatically. Buttons will illuminate while in use.
8. If the ingredients stick to the side of the Pitcher, stop the appliance by pressing POWER and wait for the blade to stop turning.
9. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning. The unit will enter idle-mode.
10. Press POWER to turn off the unit completely. Twist the Pitcher counterclockwise and lift off the Motor Base. Pour and enjoy!

Cup

1. Place the Motor Base on a clean, dry, level surface such as a counter or table.
2. Add ingredients to the NutriBullet ® Cup
3. Twist the Easy-TwistExtractor Blade onto the Cup until tightly sealed.
4. Plug the power cord into an electrical outlet and press POWER to turn on the blender.
5. Turn the Cup upside down and place it onto the Motor Base, gently turning the Cup clockwise to lock into the Motor Base.
6. To start blending, select a speed or the EXTRACT program on the Blending Control Panel. This program will turn off automatically. Buttons will illuminate while in use.
7. When you have reached your desired consistency, pause/stop the appliance by pressing POWER or the speed you selected and wait for the blades to stop turning.
8. Press POWER to turn off the unit completely. Unlock the assembly by gently twisting the Cup counterclockwise. You will hear a click. Enjoy!
   

Control Panel

Turning On/Off

The POWER button actuates the master power of the appliance. When pressed, this button lights up to indicate the motor is powered on, and the other functions can be used. Always turn the master power off and unplug the unit when the machine is not in use.

The Extract Program

Use to break down whole fruits, vegetables, and ice into nutrient-rich smoothies. This button will activate a run cycle that shuts off automatically

Low Speed

Use to mix thin batter, gravies, marinades; scramble eggs; process cooked foods and uncooked fruits.

Medium Speed

Use to cream soups, mix dips, grind nuts, and blend sauces, spreads, mixed drinks, powdered drinks, and milkshakes.

High Speed

Use to liquefy thick mixtures and blend frozen fruits and vegetables.

Pulse

Use to control chopping and processing.

Low, Medium or High

Select a speed and press once to turn on. The button will illuminate. To pause/stop the unit, press the button a second time — it will de-illuminate — or press POWER. While in the idle-mode, the POWER button will remain lit. To fully power down after pausing, press POWER and unplug the unit.

Extract Program

Press the EXTRACT button, and the nutribullet® Blender Combo will do the work for you. This program automatically stops at the end of its cycle. To pause or stop the blender, press EXTRACT again or POWER.

Pulse

Press and release the PULSE button to chop ingredients. If you hold this button down, it will continue to run until you release it.

Care & Maintenance

Cleaning the nutribullet® is easy. The Pitcher is dishwasher-safe, while the Cups and To-Go Lids are TOP RACK dishwasher-safe. The EasyTwist Extractor Blade and Motor Base can be quickly hand-washed with soap and water. Read on for best practices.

Here’s how to clean the NutriBullet

1. Do not attempt to handle the appliance until all parts have stopped moving!
2. Detach the nutribullet® Cup / Easy-Twist Extractor Blade or Pitcher from the Motor Base.
3. Clean the individual components (Motor Base, Easy-Twist Extractor Blade, nutribullet® Cups) as recommended in the following pages.

MOTOR BASE

• Do not attempt to remove any pieces from the Motor Base.
• Use a sponge or dishcloth dampened with warm, soapy water to wipe down the Motor Base until clean.
• If necessary, you may use a small brush to scrub the actuator system area to ensure it’s clean.
• To clean leakage residue from the Motor Base, wipe with a damp sponge and warm water.

EASY-TWIST EXTRACTOR BLADE

• Blades are sharp! Handle the Easy-Twist Extractor Blade with care when cleaning!
• It is best to clean blades immediately after use to reduce the buildup of residue.
• If food particles get stuck, use a small brush or sponge to target and dislodge them.
• Dry the Easy-Twist Extractor Blade completely after every use.
• Regularly check the condition of the bottom of the blade for cracking or breakage.
• If damaged, replace the Easy-Twist Extractor Blade immediately to prevent possible personal injury.

NUTRIBULLET® CUPS & TO-GO LIDS

These items are TOP RACK dishwasher-safe. We recommend rinsing and briefly scrubbing them with a dish brush to remove any remaining debris before placing them in the dishwasher. NEVER use the sanitise cycle to wash the cups — heating this high can warp the plastic.

NUTRIBULLET® PITCHER

• NEVER use the sanitise cycle to wash the Pitcher — heating this high can warp the plastic.
• If preferred, hand-wash the Pitcher with soap and water.
• Stuck-on ingredients might require extra scrubbing from a dish brush or sponge.
• Regularly check the structure of the Pitcher and twisting threads for cracking,  crazing, or breakage.
• If damaged, replace immediately to prevent possible personal injury.
• Doing so may cause the Pitcher and Motor Base to separate, exposing the blade assembly and potentially causing severe personal injury.

TAMPER

• Always hand-wash the Tamper with soap and water. Stuck-on ingredients might require extra scrubbing from a dish brush or sponge.

One-Year Warranty

Limited Warranty

• NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet® against defects in materials and workmanship for one year from the date of original retail purchase.
• A replacement product assumes the remaining warranty of the original product.
• A repaired product has a one-year warranty from the date of repair.

Obtaining Warrabty Service

• Before sending your product for limited warranty service, please make sure to keep a copy of all relevant documents for your files (receipt, etc.).

Exclusions & Limitations

• This limited warranty extends only to the Nutribullet NBG50100 Everygrain Cooker original consumer purchaser and is not transferable.
• In addition, proof of purchase must be demonstrated.
• NutriBullet shall not be liable for any incidental or consequential damages for breach of this limited warranty or any implied warranty on this product.
• This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
• NutriBullet is not liable for any damage to products not covered by this warranty (e.g., cups, book, User Guide).
• This warranty gives you specific legal rights, and you may also have other rights that vary by state or province.

Warranty registration

The registration will enable us to contact you in the unlikely event of a product safety notification.

Customer Service

• Visit: http://nutribullet.com 
• Call: 1.800.523.5993