AVANTCO 194SQRCGF Countertop Glass Froster
Safety Instructions
- This product works with liquid CO2 only; do not use other compressed gas cylinders with high-pressure or non-liquid CO2.
- Install this product in a well-ventilated area to assist in venting excess CO2.
- Use a grounded outlet with the correct voltage. Do not use an extension cord.
- Do not immerse cords, plugs, or the equipment in water or other liquids.
- Keep cords away from wet areas and avoid hanging over counters to prevent tripping hazards.
- Replace cords only with the manufacturer’s cord set.
- Instruct and train users in safe and correct operation.
- Do not modify the settings or components outside of the manufacturer’s specifications.
- Ensure all operational or safety labels are visible and legible. Do not remove any labels.
- Regularly inspect the for signs of wear, damage, or malfunction, and address any issues promptly.
Setup and Operating
- Connect the glass froster with the CO2 tank and make sure there is no gas leak.
- Slowly open the CO2 tank, ensuring no leaks in the system, then fully open the CO2 tank.
- Connect the glass froster to the power.
- Press the blue-red button to turn on the machine.
- Prepare the glasses.
- Press the blue button to ensure the equipment is operational.
Replacing CO2 Cylinder
- Close the shut-off valve of the CO2 cylinder.
- Loosen the nut on the CO2 cylinder and remove the CO2 cylinder.
- Replace with a full CO2 cylinder.
- Place a steel wire for the connection hose around the CO2 tank.
- Press down on the blue button to ensure the equipment is operational.
Siphon Tube
Troubleshooting
Customer Service
- Website: https://www.avantcoequipment.com/
- Tel: 717-381-4844
FAQs
Q: What is the primary function of the Avantco 194SQRCGF Glass Froster?
Ans: The glass froster rapidly cools and frosts glasses, improving the temperature and appearance of cold drinks at cafes, restaurants, and bars.
Q: What types of glasses can I use in the froster?
Ans: The majority of common beer mugs, pint glasses, highball glasses, and cocktail glasses can all be used with the froster. Steer clear of fragile or non-freeze-safe glasses.
Q: How long does it take to frost a glass?
Ans: Depending on the glass’s initial temperature and the surrounding room circumstances, the glass usually frosts in three to five minutes.
Q: Does the froster require any special installation?
Ans: There is no need for a particular installation. The gadget only needs to be plugged in and placed on a level, sturdy countertop next to a typical 120V electrical socket.
Q: Is there any maintenance required for the froster?
Ans: Indeed. To preserve effectiveness and hygiene, periodically clean the interior, check and clear the drip tray, and look for wear on the door gasket.
Q: Can I frost plastic or acrylic glasses?
Ans: It is not advised. Glasses made of plastic or acrylic may break or become brittle in cold weather. Use only freezer-rated glassware.
Q: What temperature does the froster maintain inside?
Ans: To swiftly frost the glasses, the unit usually keeps the temperature between -10°F and 0°F (-23°C and -18°C).