AVANTCO 194SQRCGF Countertop Glass Froster
Safety Instructions
- This product works with liquid CO2 only; do not use other compressed gas cylinders with high-pressure or non-liquid CO2.
- Install this product in a well-ventilated area to assist in venting excess CO2.
- Use a grounded outlet with the correct voltage. Do not use an extension cord.
- Do not immerse cords, plugs, or the equipment in water or other liquids.
- Keep cords away from wet areas and avoid hanging over counters to prevent tripping hazards.
- Replace cords only with the manufacturer’s cord set.
- Instruct and train users in safe and correct operation.
- Do not modify the settings or components outside of the manufacturer’s specifications.
- Ensure all operational or safety labels are visible and legible. Do not remove any labels.
- Regularly inspect the for signs of wear, damage, or malfunction, and address any issues promptly.
Setup and Operating
- Connect the glass froster with the CO2 tank and make sure there is no gas leak.
- Slowly open the CO2 tank, ensuring no leaks in the system, then fully open the CO2 tank.
- Connect the glass froster to the power.
- Press the blue-red button to turn on the machine.
- Prepare the glasses.
- Â Press the blue button to ensure the equipment is operational.
Replacing CO2 Cylinder
- Close the shut-off valve of the CO2 cylinder.
- Loosen the nut on the CO2 cylinder and remove the CO2 cylinder.
- Replace with a full CO2 cylinder.
- Place a steel wire for the connection hose around the CO2 tank.
- Press down on the blue button to ensure the equipment is operational.
Siphon Tube
Troubleshooting
Customer Service
- Website: https://www.avantcoequipment.com/
- Tel:Â 717-381-4844