AVANTCO 177CUC60 Stainless Steel Coffee Urn User Manual

Protect against electrical shock by keeping all cords, plugs, and other electrical components away from water or other liquids.
Unplug this unit when not in use and before cleaning.
Allow the unit to cool before putting on or taking off parts.
DO NOT operate this or any appliance with a damaged electrical cord or plug.
DO NOT use outdoors.
DO NOT place on or near a hot gas or electric burner.
Attach the plug to the appliance first, then plug the electrical cord into the wall outlet.
Disconnect the unit by removing the electrical plug from the wall outlet.
DO NOT use the appliance for any application other than its intended use.
DO NOT insert metal utensils or oversized foods into this unit, as they may cause a fire and heighten the risk of electrical shock.
DO NOT store any item on top of this unit when in operation.
DO NOT clean with metal scouring pads, as pieces can break off and touch electrical components, heightening the risk of electrical shock.
Never place materials such as paper, cardboard, plastic, etc. in this conveyor toaster.
DO NOT cover the interior of this unit with metal foil, as it may cause the conveyor toaster to overheat.
Turn off the appliance by removing the plug from the wall outlet.
Note that the use of accessories not recommended by the manufacturer may result in injury.

Remove all packaging from inside and outside of the coffee urn.
Fill the coffee urn with water, boil it, and discard it. This clears the urn of any packaging residue.

Place on a flat, level surface.
Turn the lid counterclockwise to open.
Pour in water. Make sure the water AVANTCO 177CUC60 Stainless Steel Coffee Urn is above the “MIN” indicator and below the “MAX” indicator.
Place the lid on top of the urn and turn clockwise to lock it into place.
The percolator filter and basket are not required for boiling water.
Switch ON. a. The “HEATING” light will turn on to indicate that the boiling process has begun.
Tilt the faucet lever to dispense.

Boil Dry Protection

Boil dry accidents are the result of boiling all the water out of an urn.
These kinds of accidents shorten the component and product life in all water boiling appliances.
To prevent boil dry accidents, this appliance is equipped with a thermal limiter with an auto reset limit on.
If the water in the tank is below a certain low level, the appliance will turn itself off automatically.
It takes up to 8 minutes to get back to work after the temperature cools down.
To decrease the chance of a boil dry accident, operators are advised to turn the appliance off when not in use, especially overnight.
Otherwise, the auto reset limit will keep the furnace running from being heated to being off back and forth, therefore damaging the heating system.

Unplug the unit and pour out any remaining water or coffee. Allow the unit to cool.
After the urn has cooled, add hot water, brush the interior sides, and rinse with hot water until the water exiting the faucet runs clear.
Clean the filter unit and the lid with a non-abrasive detergent. Dry both components with a soft, dry cloth. The Noble Chemical Klearly Koffee Cleaner (#147KKOFFEE QT) is recommended.
The stainless steel, as well as the tube inside, can be cleaned with detergent and a scouring pad.
The urn’s tap must also be cleaned to ensure proper cleaning. If necessary, use a de-scaling agent on the tap.
Clean the urn’s faucet with a bottle brush. Then wash the tap with warm, soapy water and rinse.
Use a soft cloth to wipe the body dry. Do NOT use benzene, thinners, or harsh abrasives for cleaning, as these will damage the exterior finish of the urn.
Always clean the coffee urn immediately after each use.

Scale buildup can affect the urn, tap, and faucet.
Supermarket de-scaling agents work well, along with a variety of other techniques. We recommend Urnex (#15-DLQ12-1) 1 Liter Dezcal Coffee Equipment Liquid Scale Remover as a de-scaling agent.
For a more natural approach, follow these steps.
Slice a lemon into four pieces, wrap them in a cloth, and place them in the urn.
Pour in water up to the “MAX” water level indicator.
Boil the water and allow the lemons to sit inside the unit for about 1 hour.
Pour out the water and lemons, and use a nylon brush to scrub the inside of the urn.
To completely remove the smell AVANTCO 177CUC60 Stainless Steel Coffee Urn or aftertaste, refill the urn, boil the water again, and dispose of the water.

This coffee urn is fitted with a thermal fuse for added safety.
If the boil-dry protection measures fail, its thermal fuse will activate and shut off the appliance.
The thermal fuse is a one-time-use component.
Once it activates, the fuse automatically breaks and cannot be used again.

Kyocera E4810 Ultra Rugged Flip Phone Instructions Manual