TeeJet TECHNOLOGIES IC35 Sprayer v1.20 Control User Manual

Maximum pressure limiter for hydraulic pump. This is a safety function.
IC35 flow controller compensated for turn compensation, to control the correct application rate while turning.
Boom wing up/down, softkey added for adjusting wings.
The virtual switch box needs an unlock to be available.

Fixes

PLP module 1, the serial number was always 0.
Switchbox supports Task Controller TeeJet TECHNOLOGIES IC35 Sprayer v1.20 Control servers with fewer sections than the capability of the Task Controller client.
Switchbox support for booms with fewer than 9 sections.
Some sections as drawn as even though they are OFF.
Error in turn compensation fixed.The
Updated Tip table.

Global first release of the C35 series
Based on an enhanced hardware platform with more processing power and memory for increased performance
Provides a USB connector for program updates and import/export of data
Fully pin compatible with IC34 and supports drop-in replacement
Provides an overall feature set similar to the IC34 series
Supports section control for 30 sections via PowerLink+ modules
Provides Turf mode
Enables application rate control via hydraulic pump speed control when a master valve is present in the system
Integrates with DynaJet IC7140 v1.11 and later versions via exchange of dedicated CAN messages for better overall system performance
Offers Individual Nozzle Shut Off for a maximum of 100 nozzles, when used in combination with DynaJet IC7140 v1.11 or later
Provides dedicated DynaJet regulation modes based on either pressure or flow when combined with DynaJet IC7140 v1.11 or later.
Manual section control of individual nozzles via a Virtual Switchbox when unlocked and supported by DynaJet IC7140
GUI enhanced to enable symmetrical setup of the boom
Tank shape calibration algorithm updated
Added more TeeJet nozzles

Kyocera E4810 Ultra Rugged Flip Phone Instructions Manual