Ninja BC251SM Series Blast Max Portable Blender User Guide

Ninja BC251SM Series Blast Max Portable Blender

Safety Instructions

1. Read all instructions before using the appliance and its accessories.
2. ALWAYS exercise care when cleaning the CrushBlade Assembly inside the vessel.
3. The blades are sharp; handle them carefully. Blades are sharp. Handle carefully.
4. Failure to use care when handling the CrushBlade Assembly will result in a risk of laceration.
5. Take your time and exercise care during unpacking and appliance setup.
6. This appliance contains sharp blades that can cause injury if mishandled.
7. Keep hands, hair, and clothing out of the vessel when loading and operating.
8. DO NOT put your hands inside the vessel or anywhere near the CrushBlade Assembly.
9. To protect against the risk of fire from battery damage,
10. DO NOT submerge the motor base in any form of liquid or ice.
11. DO NOT store outdoors or allow the motor base to come into contact with any liquid.
12. DO NOT allow children to operate this appliance or use it as a toy.
13. Before each use, inspect the CrushBlade Assembly for damage.
14. ALWAYS use the appliance on a dry and level surface.
15. Keep hands, hair, and clothing out of the vessel when loading and operating.
16. During the operation and handling of the appliance, avoid contact with moving parts.
17. DO NOT operate the appliance with an empty container.
18. DO NOT microwave any containers or accessories provided with the appliance.
19. DO NOT expose the containers and accessories to extreme temperature changes.
20. They may experience damage. NEVER leave the appliance unattended while in use.
21. Operate ONLY with the sip lid on. DO NOT refrigerate or freeze the blender motor base.
22. DO NOT use an extension cord. Plug the charger directly into an electric outlet.
23. Use only with the charger provided with the appliance.
24. Do not attempt to use this charger with any other product.
25. Likewise, do not attempt to charge this appliance with any other charger.

Parts

• Sip Lid
• Carry Handle
• Blending Vessel with built-in
• BrushBlade Assembly
• Motor Base
• Charging Cord
• Charging Port

Blending vessel size and quantity, accessories, and colour vary by model.

Battery Use

1. The battery is the power source for the Ninja Blast Max Portable Blender.
2. Carefully read and follow all charging instructions.
3. DO NOT incinerate this appliance even if it is severely damaged.
4. The lithium-ion batteries can explode in a fire.
5. Always properly recycle products powered by lithium-ion batteries.
6. Since there is no power cord, prevent accidental blade activation by ensuring the blender is turned off.
7. OFF when not in use, while cleaning, or when drinking from the sip lid.
8. Keep the battery away from all metal objects such as paper clips, coins, keys, nails, or screws.
9. Shorting the battery terminals together increases the risk of fire or burns.
10. Under abusive conditions, liquid may be ejected from the battery.
11. Avoid contact with this liquid, as it may cause irritation or burns.
12. If contact occurs, flush with water. If liquid contacts the eyes, seek medical help.
13. This unit contains batteries that are only replaceable by skilled persons.
14. This unit contains batteries that are non-replaceable and moving parts that potentially present a risk to the user.

Charging

Charge the unit before first use with the provided charging cord. The charging port is located at the back of
the motor base. When charging, the LED will flash GREEN. When the charge reaches 100%, the power icon LED will remain solid GREEN. A full charge may take up to 3 hours. Refer to the LED section for additional information on charging states

Before First Use

Remove all packaging materials from the unit. Exercise care when unpacking the CrushBlade Assembly,
as the blades are sharp. To clean the vessel and lid, remove the vessel from the motor base, remove the lid, and add warm water up to the MIN LIQUID line.

Next, add a small drop of liquid dish soap. Securely attach the lid to the vessel, attach the vessel to the motor base, and blend. After the blend has completed, remove the vessel from the motor base and empty the contents into a sink. Rinse the vessel and lid with warm water, then let them air-dry. DO NOT submerge the motor base in water when cleaning. Exercise care when handling the CrushBlade Assembly, as the blades are sharp.

Control Panel

PROGRAMS:

Using the Blending Vessels

1. Install the vessel onto the motor base, rotating clockwise until it clicks into place.
2. Turn the unit ON by pressing the button until all program LEDs illuminate solid WHITE and the display illuminates, displaying the remaining battery life colour.
3. Ensure the unit is fully charged ( is solid GREEN) before loading the vessel.
4. Remove the lid from the vessel and add ingredients, starting with liquids, then solid ingredients.
5. If using ice, always add it last. DO NOT fill ingredients past the MAX FILL line.
6. Secure the lid onto the vessel, twisting clockwise to tighten.
7. For a 30-second blend, press the BLEND button. For ingredients including fresh or frozen fruit, press SMOOTHIE, and for frozen drinks with just ice and liquid, press CRUSH. If needed, shake the blender between blends to move ingredients.
8. When blending is complete, remove the vessel from the motor base by rotating the vessel counterclockwise and lifting it.
9. DO NOT remove the vessel before the blade has stopped moving. Open the sip lid to sip.
10. Power OFF the unit by pressing the button. If you want to drink with the motor base attached, turn the motor base OFF before drinking.
11. Refer to the Care & Maintenance section for cleaning and storage instructions.

Care, Maintenance & Cleaning

Blades can still operate when the lid is removed. Always remove the vessel from the motor base before cleaning the vessel.

Remove the vessel from the motor base and remove the lid from the vessel. Add warm water to the 6 oz. Line, then add 1 small drop of dish soap. Secure the lid onto the vessel, attach the vessel to the motor base, and press BLEND. Let blend for a few seconds, Ninja BC251SM Series Blast Max Portable Blender, then press the BLEND button again to stop the program. Remove vessel from motor base, empty contents, and rinse vessel and lid with warm water.

Remove the vessel from the motor base and wash the lid and vessel with warm, soapy water. Use a
dishwashing utensil to clean the CrushBlade Assembly inside the vessel. Exercise care when cleaning the
CrushBlade™ Assembly, as the blades are sharp. Emthe pty contents and rinse the vessel and lid with warm water. DO NOT expose the motor base to water or other liquids. Let all parts air-dry.

Motor base is NOT dishwasher safe, and CANNOT be exposed to or submerged in water or other liquids. If needed, wipe the motor base with a damp cloth. Vessel and sip lid are top-rack dishwasher safe. DO NOT use a heated dry cycle. Ensure the vessel and sip lid are removed from the motor base before placing them in the dishwasher.

Storage

Store the unit upright in a cool, dry environment. DO NOT store blended or unblended ingredients in the vessel with the CrushBlade Assembly for prolonged periods. DO NOT stack items on top of the vessel. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard. If your unit needs servicing, email customer service at SG customerservice.sg@sharkninja-apac.com

MY customerservice.my@sharkninja-apac.com So we may better assist you, please register your product online at https://sharkninja.sg/apps/product-registration or  https://sharninja.my/apps/product-registration.

Troubleshooting

The control panel doesn’t turn off.

• Press the button to turn the unit ON and OFF.

Doesn’t mix well; ingredients get stuck.

• When filling the vessel, start with liquid, then fresh fruit or veggies, followed by leafy greens or herbs. Then add seeds, powders, or nut butters. Finish with ice or frozen ingredients.
• If ingredients are routinely getting stuck, adding some liquid will usually help.
• You can also shake the blender while blending or turn the blender upside down, start a blend cycle, and turn it right side up to move ingredients while blending.

The sip lid is hard to assemble onto the vessel.

• Set the assembled motor base Ninja BC251SM Series Blast Max Portable Blender and vessel on a level surface.
• Place the sip lid on top of the vessel and align the threads so the sip lid sits flat. Turn clockwise until you have a tight seal.

The vessel is hard to assemble onto the motor base.

• Set the motor base on a level surface. Place the vessel on top of the motor base and align the threads
  so the vessel sits flat.
• Turn clockwise until the vessel clicks into place. When the vessel is properly installed, the program LEDs on the control panel will be white, and the button will display the current battery level.

One-Year Limited Warranty

The warranty commences on the date of purchase and expires at thedthperiodriod. In
The unlikely event of a defect due to faulty materials or workmanship within the guarantee period

For warranty claims, you will need to submit proof of purchase in the form of a valid receipt that displays the date and place of purchase. Replacement items will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase. Please note:

Your warranty is subject to the following conditions

• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged, or dropped in water.
• To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If the supply cord is damaged, it must be replaced by a qualified electrician to avoid a hazard. Incorrect re-assembly or repair can cause a risk of electric shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified, or repaired by anyone.
• The item has been subjected to fair wear and tear.
• The item has not been used for trade, professional, or hire purposes.
• The item has not sustained damage through foreign objects,substancesaccidentsst..
• Accidental damage
• Damage as a result of use not by the rating plate
• Use of parts and accessories that Ninja BC251SM Series Blast Max Portable Blender are not genuine Ninja components

Customer costs within warranty

• The customer is responsible for any inward freight charges to return a product for warranty if requested, and outward freight charges for warranty parts and or replacement unit.

What is not covered?

• Accessories are supplied with the item.
• Components that are subject to natural wear and tear caused by normal use,inby the operating instructions.
• Unauthorised/improper maintenance/handling or overload is excluded from this warranty..

Product Registration

Please visit https://sharkninja.sg/apps/product-registration or  https://sharkninja.my/apps/product-registration to register your new NinjaTM product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number, along with your name and address. The registration will enable us to contact you Ninja BC251SM Series Blast Max Portable Blender in the unlikely event of a product safety notification. By registering, you acknowledge that you have read and understood the instructions for use and warnings outlined in the accompanying instructions.

• SG https://sharkninja.sg/apps/product-registration
• MY https://sharkninja.my/apps/product-registration

Customer Service

• Website: https://ninjakitchen.co.uk/
• PayPal: 0800 368 7155