Ninja SLUSHi Professional Frozen Drink Maker User Manual

Ninja SLUSHi Professional Frozen Drink Maker

Using the Rinse

This cycle agitates, without cooling, to rinse the unit. After using the Rinse cycle, wash all parts by hand or in a dishwasher to fully clean the unit after each use.

1. Dispense any remaining frozen drink.
2. Stop the current preset. Press the RINSE button.
3. Add hot water up to the vessel’s max fill line (64 oz).
4. Slowly dispense the water from the unit immediately after filling.
5. Stop Rinse cycle by pressing the RINSE button again.
6. Press the power button to turn off the unit.

Refer to the Inspiration Guide for more details on cleaning parts after using the Rinse cycle.

NO-Prep Slushes

Control Panek

• PRESETS 2
  unique presets that use RapidChill Technology to determine the perfect temperature for the ideal frozen drink.
• TEMPERATURE CONTROL SETTING
  Each preset will start at a default/optimal temperature for ideal texture.
• For sippable frozen drinks,
  decrease the temperature level by pressing the bottom arrow on the control panel.
• For a thicker, colder frozen drink,
  increase the temperature level by pressing the top arrow on the control panel.

Troubleshooting

RECIPE NOT SLUSHING?
If your recipe has not reached the desired texture after 60 minutes, use the Temperature Control Setting to increase the temperature one level. Wait 10–15 minutes to test the recipe. If the texture still isn’t what you desire, increase the temperature by one level again. Repeat until the desired texture is achieved.

SLUSH NOT DISPENSING?
For the best dispensing experience, fill the unit to the max fill line and ensure the unit is running. For a smoother dispense experience, decrease the temperature level by pressing the bottom arrow on the control panel. More sippable frozen drinks will dispense smoothly.

Low-Sugar Alert

Temperature Control LEDs will flash one at a time in descending order, starting with the top LED. Preset LEDS will flash, and the unit will beep every minute for 15 minutes.

If a drink does not meet the minimum requirement of total sugar

Add 1–2 tablespoons flavored syrup, juice, sugar, date sugar, coconut sugar, maple syrup, agave, simple syrup, or honey per serving (8 oz). Combine additional sugar with the base prior to pouring into the unit.

High-Alcohol/High-Sugar Alert

Temperature Control LEDs will flash one at a time in ascending order, starting with the bottom LED. Preset LEDs will flash, and the unit will beep every minute for 15 minutes.

If a drink exceeds the maximum alcohol and sugar amounts

Add 1/4 cup of water per serving (8 oz) to dilute the input.

Refer to the Inspiration Guide for more sugar and alcohol guidelines.

Temperature Progress

Temperature Control LEDs pulse showing progress to reach the temperature. The unit will beep, and the LEDs will remain solid once complete.

Soda Slush

TOTAL TIME:

• 2–3 SERVINGS: 15 MINUTES
• 4–6 SERVINGS: 40 MINUTES
• 6–8 SERVINGS: 45 MINUTES

Ingredients

Directions

1. Pour soda into the vessel. Select SLUSH. Preset will start at the recommended temperature for ideal texture.  If desired, adjust temperature.
2. Once the frozen drink reaches the optimal Ninja SLUSHi Professional Frozen Drink Maker temperature, the unit will beep. Dispense and enjoy.

Use Of Sodas

Directions

1. Pour all ingredients into the vessel.
2. Select FROZEN DRINK. Preset will start at the recommended temperature for ideal texture.
3. If desired, adjust temperature.
4. Once the frozen drink reaches optimal temperature, the unit will beep. Dispense and enjoy.

 TIP: For best results, chill the liquid before adding it to the unit.

WHAT’S IN THE BOX

Ninja Slush

1. Add liquid(s) through the easy-fill port.
2. Press the power button to turn on.
3. Select a preset to start.
4. If desired, adjust the default/optimal temperature.
5. The unit will beep, and the LEDs will remain solid once the frozen drink reaches temperature.
6. Dispense and enjoy.