K-Mate BTH132 Bluetooth Stereo Headset
Introduction
BTH132 is a Bluetooth stereo headset suitable for sports. With two batteries for long working. You can use it to enjoy wireless music and make a call at the same time.
Part Description
Charging for the headset
- When the headset is low power, the headset emits “Battery low” once every 2 minutes, and the red LED flashes instead of the blue LED.
- Please recharge the battery of the headset.
Using a USB cable
- Turn on the cover of the charging jack, and plug the USB charging cable
- Plug the other side of the cable into the USB port of PC Red light on: Charging. Red light off: Finish charging
- It will take about 1.9 hours to finish charging
Getting Started
Turning on/off the headset
Wearing the headset
- Choose the suitable size eartips according to your ear and wear as follows:
- Wearing a headset as below the picture to fix the headset on the ear.
- The ear-hook can be bent and adjusted at multiple angles to get a suitable wearing effect. Do not put the ear-hook in half or it will be damaged.
- The cable management can be used to buckle a long line so that wearing a headset more steadier.
- You can also fix the headset as a necklace with the cable management. It is convenient and beautiful.
Pairing/connecting
Pairing a headset with a Bluetooth cell phone via Bluetooth
- Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information.
The general pairing procedures are as follows
- Keep your headset turned off and within 1 meter of phone.
- Press and hold for about 5 seconds until the red and blue LED flash alternately, the headset enters pairing mode and emits “pairing”
- Activate your cell phone’s Bluetooth function and search for Bluetooth devices within range. Select “BTH132” from the list of devices shown.
- After a successful connection, the blue LED of the headset flashes twice every 4 seconds and emits “Your headset is connected.”
Pair the headset with a Bluetooth transmitter via Bluetooth
- You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly.
- Hereby take BTT005 (Bluetooth transmitter, not included in accessories) for example.
- The pairing steps are as follows.
- Keep your headset and transmitter within 1 meter when pairing.
- Make the headset enter pairing mode (Please refer to “How to enter pairing mode);
- Turn on the Bluetooth transmitter and make it enter pairing mode. It will search for Bluetooth devices automatically.;
- After successful pairing and connecting, the blue LED of the headset flashes twice every 4 seconds and emits a “du” tone.
- Pairing a headset with multiple devices via Bluetooth. The headset can connect with two Bluetooth cell phones at the same time. The general pairing procedures are as follows.
- Pairing the headset with device one
- Turn on the headset and make it enter pairing mode again, and pair it with device two.
- Operate device one to connect with the headset. The headset has already connected with two devices at this moment. Restart the headset, and it will also be connected to two devices automatically.
Turn on
- Long-press press button under standby mode(not connected device), and release it until you hear “Enable multipoint”
Turn off
- Long-press press button under standby mode(not connected device), and release it until you hear “Disable multipoint”
- To improve the stabilization of the headset, we suggest you turn off the multi-pair function when you are only connecting with one cell phone.
Battery display
When the headset is connected with IOS device, it will display the battery level of the headset on the device. When the headset is in low battery, the power symbol shows red, indicating that you need to charge for headset.
Basic Operation
Making a call with the headset
Connect with two cell phones..
Playing music
LED indicator
Factory Reset
In the status of charging, long-press the button ton about 3 K-Mate BTH132 Bluetooth Stereo Headset seconds, a nd release it until the red and blue LED flashes simultaneously. You will hear 2 prompt tones: “reset paired device list”
Care and maintenance
Read the following recommendations carefully before using BTH132. Following these, you will be able to enjoy this product for many years.
- Please note that the cord management clips are an optional accessory for better wwear
- Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery, or distort certain plastic parts.
- Don’t expose the product to cold areas. It may damage the internal circuit board.
- Don’t let it fall onto the floor or other hard surfaces.
- Don’t use intensive chemical products or detergents to clean the product.
- Don’t scratch the surface with sharp things.
- Don’t use this product during strenuous exercise.
Specifications
FCC Rules
This equipment generates and uses can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help
Customer Support
- 86-0760-88320910
- E Bldg.,Fuwan ind.Zone,Fuwan Nan Rd.,Zhongshan China, Jining, Shandong, China
- https://kmate8.goldsupplier.com/
FAQs
Q: Can I connect the headset to two devices at the same time?
Ans: Disconnect the current device and manually reconnect to the other to switch between them.
Q: How will I know when the battery is low?
Ans: The LED will flash red, and you will hear a voice prompt that reads, “Battery Low.” To prevent unexpected disconnections, it is advisable to charge the headset as soon as possible.
Q: Can I use the headset while it’s charging?
Ans: Although technically feasible, it is not advised for battery longevity and safety. Before using, let it charge completely.
Q: Is the K-Mate BTH132 water-resistant?
Ans: The BTH132 is not waterproof;, however, it is made to withstand light perspiration. Steer clear of submerging it in water, severe rain, or showers.
Q: Can I use this headset for voice assistants like Siri or Google Assistant?
Ans: Indeed! While connected, hold down the multi-function button for two seconds.
Q: Does it support a wired connection?
Ans: No. The K-Mate BTH132 is a wireless-only Bluetooth stereo headset and does not support a 3.5mm audio cable or wired input.
Q: Can I use it for gaming or video calls on a PC?
Ans: Yes, provided that Bluetooth audio devices are supported by your computer. A wired or low-latency Bluetooth headset, however, might work better for low-latency gaming.